Part #
A-8220-MB
|
Model Year
28-31
Two tube style rivets to mount the center hood rod bracket to the radiator shell. These are a 5/32" semi tubular rivet. Any of the 1/8"" tubular rivet setting tools will work. U.S.A.
Part #
A-8261/87
|
Model Year
09-34
The original style hose clamps just like Ford used. Two large for the top and 4 small for the bottom. Cad plated with correct hardware. Fits both the Model A and Model T.
Part #
A-8271-3
|
Model Year
28-31
This is an electronic American made gauge kit. The gauge is a dual faced gauge that will register your oil pressure as well as the water temperature.
Oil pressure measures 0-15 psi, the water temperature measures 100-260 degrees. The kit includes an electronic oil pressure sender and an electronic water temperature sender.
The gauge will fit any standard 2-1/16" gauge holder bracket (not included). The gauge will work on 6 or 12 volt systems, negative or positive ground!
Both senders mount using 1/8" NPT. If you want the gauge to be illuminated, you must purchase the illumination kit separately. 1928-31.
Part #
A-8115-OR
|
Model Year
09-32
An excellent repo of the old original. Made in the U.S.A. and guaranteed not to leak a drop! This same petcock was used on Model A's and T's. For A's, it was used in the water pipe between the motor and the lower radiator outlet. For T's, it was used in the bottom of the radiator, the oil pan, and in the gas sediment bowls. U.S.A.
Part #
A-8250-BO
|
Model Year
28-31
When converting the Model A to a V-8 style water pump, this finned aluminum plate blocks off where the outlet was on the head. U.S.A.
Part #
A-8255
Model Year
28-31
Part #
A-8255-Q4
Model Year
Paper gasket for the outlet on the head. U.S.A.
Part #
A-8005-AP
Model Year
28-29
Part #
A-8005-BP
Model Year
30-31
Same radiator as our heavy duty except this one is pressurized. Has a dummy neck on top with pressure neck mounted on the back of the top tank. 4 psi pressure cap A-8100-X recommended, not included.
Part #
A-8100-X
|
Model Year
28-31
For use with our pressurized Model A radiators. This is a modern 4 pound cap.
Part #
A-8213-MB
|
Model Year
28-31
Small and long! Screws and nuts for mounting radiator badges to the radiator core.