Muffler

|
Show 9 Of 14
14 Results
Part # A-5230-OR Model Year 28-31
Part # A-5230-ORSS Model Year 28-31
Part # WEB-KIT-0651 | Model Year 28-31
An authentic Model A muffler copy that has been reproduced to the original Ford blueprint. Correct baffles for exact back pressure. All bends are mandrel bent. Same gauge metal as original and U.S. made! There are slightly cheaper mufflers on the market but they are not made correctly and have too much back pressure.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5230-ORAR | Model Year 28-29
Originally used from the beginning of production until March of 1929. Made just like our authentic steel style mufflers except the inlet pipe has a slightly different bend on it. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$299.00 EA
Part # A-5256-A Model Year 28-29
Part # A-5256-B Model Year 30-31
Part # WEB-KIT-0653 | Model Year 28-31
Exact duplicate of the old original clamps that held the tail pipe to the frame. Comes with original style thick headed bolt. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5252 | Model Year 28-31
Put a bead of this high heat sealant on the flange of the muffler where it bolts to the manifold for a tight seal. Works great!
DISCONTINUED
Temporarily
OUT OF STOCK
$4.95 EA
Part # A-5234 | Model Year 28-31
This little gadget slips between the muffler and the manifold to prevent leaks. Use with the A-5252 sealant.. Due to manifold variations, it is sometimes necessary to cut a slit in the sleeve where it slips in the manifold. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$4.25 EA
Part # A-5230-HS | Model Year 28-31
Just what your co-pilot was asking for! This heat deflector bolts right onto your exhaust system in 10 minutes! Forces the exhaust heat down away from your floor. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # A-5230-HP Model Year 28-31
Part # A-5230-HPSS Model Year 28-31
Part # WEB-KIT-0652 | Model Year 28-31

Manufactured so that the outside appearance is exactly like the original muffler with the mandrel bends. This muffler is designed for high performance engines over 80 horsepower.

Baffles have been opened for reduced backpressure. Slightly louder than a stock muffler, but not too much! Available in painted steel or stainless steel.

Fits 1928-31. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5251 | Model Year 28-31
A 100% original super heavy duty ductile iron clamp. Made with cad bolts and brass nuts. Our own manufacture.
DISCONTINUED
Temporarily
OUT OF STOCK
$8.00 EA
Part # A-5251-BS | Model Year 28-31
Cadmium plated bolts with brass nuts for the muffler clamp. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$2.00 SET