Manifold

|
Show 9 Of 26
Showing 9 Of 26 results
Part # A-9425-X | Model Year 28-31

Use this intake manifold when you're running a later 1932-34 "B" Zenith carburetor on your Model A.

We take one of our stock A-9425 intake manifold and bore the inside diameter of the vertical portion to suit the larger bore of the "B" Zenith carburetor.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$110.00 EA
Part # A-9425-DBU | Model Year 28-34
Aluminum "BURNS" dual carb intake manifold that will fit 1928-34 motors. Allows you to run Stromberg or Ford V8 3-bolt carburetors. Cast in 356-T6 heat treated aluminum and shot peened to relieve stress. Works with stock exhaust manifolds, cast iron headers, and steel tube type headers. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$345.00 EA
Part # A-9425-SBU | Model Year 28-34
Aluminum "BURNS" single carb intake manifold that will fit 1928-34 motors. Allows you to run Stromberg or Ford V8 3-bolt carburetors. Cast in 356-T6 heat treated aluminum and shot peened to relieve stress. Made to work with stock exhaust manifolds as it has the heat plate cast into it like a stock intake to allow for fast warm up. Can also be used with cast headers and steel tube type headers but heat plate is not as effective. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$300.00 EA
Part # A-9447 Model Year 28-31
Part # A-9447-Q5 Model Year
Part # A-9447-C Model Year 28-31
Install between the carburetor and the intake manifold. We offer a replacement paper gasket or the authentic copper/composition clad gasket. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-9430-HX | Model Year 28-31
For improved performance, this header performs the same as a tube type header but is quieter than tube type headers. Comes with adapter from 3" to 2" for stock Model A mufflers. You must run a downdraft intake with this. Can not be used with A-6705-F oil filter system. Header and Weber Intake will need to be modified for correct clearance. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$550.00 EA
Part # A-9430-C | Model Year 28-31
No more ugly rusted exhaust manifold! Our American made A-9430 exhaust manifold with a baked on ceramic coating that resembles the original bare cast iron appearance.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$170.00 EA
Part # A-9433-C Model Year 28-31
Part # A-9433-C2 Model Year 31-31
For the show car, we can offer the correct style of manifold gaskets. Copper with composition in the middle. From the beginning of production until January of 1929, Ford used individual copper/composition rings on each port. No one is currently making that version. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-9425-SD | Model Year 28-34

Cast aluminum fits 1928-34 4-cyl. engines. Use any 3 bolt style Ford flathead carb. Dual linkage positions and a vacuum port on the bottom.

INCLUDES: 2 pivot/slide/lock links; 2 bolts to mount to exhaust manifold; 1 vacuum port plug and instructions to make link bar.
U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$410.00 EA
Part # A-9429 | Model Year 28-34

Tube style header that fits 1928-34 4-cylinder motors. Headers have a 3/8" thick header mounting plate with 1-5/8" primary tubes to a collector outlet of 1-7/8." Flange plate, gasket, and bolts to connect to your exhaust system are also included. Bare steel. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$375.00 EA