12-Volt, 1cp bulb. This bulb is used in our Signal-Stat turn signal levers: A-13310-X and A-13310-XF. It is the pilot bulb that illuminates when you have your turn signal activated or the 4-ways.
It is also used to illuminate our A-6602 oil pressure gauge and our A-8272 temperature gauge for night driving.
6-Volt, 1cp bulb. This bulb is used in our Signal-Stat turn signal levers: A-13310-X and A-13310-XF. It is the pilot bulb that illuminates when you have your turn signal activated or the 4-ways.
It is also used to illuminate our A-6602 oil pressure gauge and our A-8272 temperature gauge for night driving.
The Brake and Run kit is designed to give you additional visibility on the rear of your vehicle. The small controller can be mounted directly to our A-14304 fuse panel bracket or any other convenient location. kit includes controller, 2 red bumper mounted LED lamps, wire, and all necessary terminal ends. The two lamps mounted to the bumper clamp will serve as running lights as well as brake lights when the brakes are applied. U.S.A.
Any warranty claims must be handled directly with manufacturer per instructions included with product.
The Brake & Run kit is designed to give you additional visibility on the rear of your vehicle. The small controller can be mounted directly to our A-14304 fuse panel bracket or any other convenient location. kit includes controller, 2 red universal mounted LED lamps, wire, and all necessary terminal ends. The two lamps mounted to the rear of the vehicle will serve as running lights as well as brake lights when the brakes are applied. U.S.A.
Any warranty claims must be handled directly with manufacturer per instructions included with product.
These LED lights are much brighter than standard directional lights. Mounts betwee the upper and lower bumper bars using your bumper clamp bolt, so no extra holes or creative mounting are required! 6 volt lamps have an integrated resistor so they will work with standard thermal flashers.
If you are running 12 volts you will need one electronic flasher A-13311-12X. U.S.A.
A flasher that is used when adding turn signals to your Model A. Many auto parts stores no longer carry the 6-volt flashers.
6-volt flashers are bi-polar so they will work on positive or negative ground systems.
12-volt flashers will only work on negative ground systems. They are thermal flashers.