Tail Light

|
Show 54 Of 55
Showing 54 Of 55 results
Part # A-13472-B | Model Year 30-31
This special cast iron tail light bracket was used on the following vehicles: 1929-31 Station Wagon 1930-31 Panel Delivery 1930-31 Deluxe Delivery 1930-31 Deluxe Pickup Special Delivery. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$15.95 EA
Part # A-14423-XO | Model Year 28-31
When adding a tail light to the right side, this wire will join the two tail lights to the main lighting harness. You will need a pack of the A-14487 connectors to make the attachment. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$13.75 EA
Part # A-13461 | Model Year 28-34
This gasket goes between the face of the tail light rim and the lens, but some people put one on each side of the lens to help and avoid cracking the lens. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.35 EA
Part # A-13412/13 | Model Year 29-48
The wires with the springs and washers that go through the tail light sockets and stick out the back of the tail light 24" long. Wires are the original fabric covered with the proper color. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$5.25 PR
Part # A-13467 Model Year 29-32
Part # A-13467-SS Model Year 28-31
Part # WEB-KIT-0866 | Model Year 28-34

When mounting the teacup style tail lamp to any bracket other than the fender mounted bracket, you'll need these. These shroud and protect the open area of the wires and sockets on the back side of the tail lamp.

The bottom of what looks like an elephant trunk has tabs that bend around the loom A-13412-L to hold it in place. Available in black or polished stainless.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-13456 | Model Year 28-31
Originally, this snap ring was used to hold the lense in the tail light rim. You first drop the rim gasket in the rim, next the lense, and then the snap ring. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.95 EA
Part # A-13412-S | Model Year 29-31
The metal socket that is pressed into the tail light bucket that holds the bulb. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.75 EA
Part # A-14565 | Model Year 29-31
This clip holds the tail light loom to the fender. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$2.25 EA
Part # A-13412-L | Model Year 28-31

Ford covered the exposed wires from the tail light through the fender and back under the body a couple of inches. Keeps the road dirt from damaging the wires.

On the later years ford used a loom instead of a metal conduit on the A-14406 wire. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 EA