Tail Light

|
Show 36 Of 55
Showing 36 Of 55 results
Part # A-13409 Model Year 09-31
Part # A-13410 Model Year 09-31
Part # A-13408 Model Year 09-31
Part # A-13411 Model Year 09-31
A popular accessory from the 1950's and 1960's for attaching the license plate. Head of bolt is a reflector. Available in 4 colors, green, red, blue, and amber sold in pairs.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-13463 | Model Year 28-31
This plate is used under the fender when attaching the tail light bracket to the fender. Prevents fender from cracking. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.35 EA
Part # A-13446-S | Model Year 28-34
Two retainers, and screws to hold the license lens into the tail light. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$2.50 SET
Part # A-13403-L12XS | Model Year 29-31
Epoxy coated plastic lenses are fully sealed to keep moisture out! All red. The left lens includes the clear lens for the license plate. Simply plugs into the socket where the old light bulbs went. 12-volt negative ground. If you are using an original or one of the American made reproduction tail lamps, you will need to modify the lens opening with a die grinder to make the lenses fit properly. If you don't want to do that you can purchase our stainless steel rim A-13448-SSX that fit perfectly. If you ar enot running an electronic flasher for your turn signals, you'll need to add a load resistor A-13464 to the lamp. Sequential when turn signal is applied to lamp. Left Side.
DISCONTINUED
Temporarily
OUT OF STOCK
$62.00 EA
Part # A-13403-R12XS | Model Year 29-31
Epoxy coated plastic lenses are fully sealed to keep moisture out! All red. This is for the right side. Simply plugs into the socket where the old light bulbs went. 12-volt negative ground. If you are using an original or one of the American made reproduction tail lamps, you will need to modify the lens opening with a die grinder to make the lenses fit properly. If you don't want to do that you can purchase our stainless steel rim A-13448-SSX that fit perfectly. If you ar enot running an electronic flasher for your turn signals, you'll need to add a load resistor A-13464 to the lamp. Sequential when turn signal is applied to lamp. Right Side.
DISCONTINUED
Temporarily
OUT OF STOCK
$54.00 EA
Part # A-13470-SS | Model Year 29-31

This style of tail lamp bracket was used on panel deliveries, pickup trucks and most AA trucks after July of 1929.  Used with the "teacup" style tail lamp.   Originally these brackets were cast iron and painted black.  Unfortunately the cast iron arms are no longer available. We can only get this polished stainless bracket.  Scuff and paint black to be authentic. 

DISCONTINUED
Temporarily
OUT OF STOCK
$26.00 EA
Part # A-13405-SL12 Model Year 28-31
Part # A-13405-SR12 Model Year 28-31
Part # A-13405-SL12A Model Year 28-31
Part # A-13405-SR12A Model Year 28-31
Part # A-13405-SL6A Model Year 28-31
Part # A-13405-SR6A Model Year 28-31
Part # A-13405-SL12BD Model Year 29-31
Part # A-13405-SR12BD Model Year 29-31
Part # A-13405-SL6 Model Year 28-31
Part # A-13405-SR6 Model Year 28-31

Polished stainless steel teacup style tail lamps with LED style lens. 1929-31. When used for turn signals, you'll have to add a ballast resistor A-13464 if you're using a thermal style flasher. When using electronic style flashers, you won't need to add the resistor.

DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-13448-SSX | Model Year 28-31
Fits perfectly with our new LED lenses.
DISCONTINUED
Temporarily
OUT OF STOCK
$6.00 EA
Part # A-13507 | Model Year 28-29
For the 1928-29 stop light switch. One end hooks to the stop light switch, the other to the special pin on the brake pedal. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.50 EA