Black painted teacup style tail lamps with a polished stainless rim and LED style lenses. Epoxy coated plastic lenses are fully sealed to keep moisture out. 1929-31. Left tail lamps have the lens on the bottom to shine on the license plate.
When using for turn signals, you'll have to add a ballast resistor A-13464 if using thermal style flashers. If you're using an electronic style flasher, you won't need the resistor.
Stainless steel teacup style tail lamps that were used from 1929-31. Comes with 6-volt bulbs.
Mounts inside the tail lamp behind the lens. Wires from the LED board simply plug into the sockets where the light bulbs were removed.
LED lights use less current than conventional bulbs and last quite long. Will not work in the 1928-29 drum style tail lights. U.S.A.
Epoxy coated plastic lenses are fully sealed to keep moisture out! Available in either all Red or Red/Amber. The left lens includes the clear lens for the license plate. Simply plugs into the socket where the old light bulbs went.
The 12 volt is negative ground and the 6 volt is positive ground. If you are using an original or one of the American made reproduction tail lamps, you will need to modify the lens opening with a die grinder to make the lenses fit properly.
If you don't want to do that you can purchase our stainless steel rim A-13448-SSX that fit perfectly. Order the Load Resistor A-13464 one for each LED Lens.
LED stop lamp bulb that will work in both 6 & 12 volt applications as well as negative and positive ground applications. Bulb has 6 forward facing led's and 7 sideways led's. Direct replacement for the A-13465 and A-13465-12 bulbs. 23 candle power in comparison to a regular bulb being 21 candle power so not really much brighter but only uses about 1/8 of a watt to power.
Bulb is 1-1/2" tall and 25/32" wide at the widest point.