A 3rd brake light is almost a must in todays traffic! This LED light is available in 6 or 12-volt and attaches to the back window glass using suction cups.
Can also be wired to flash with your turn signals! Easy to wire, comes with wiring diagram and instructions. Unit is 12" long and 5/8" high. Depth is 7/8".
The Brake and Run kit is designed to give you additional visibility on the rear of your vehicle. The small controller can be mounted directly to our A-14304 fuse panel bracket or any other convenient location. kit includes controller, 2 red bumper mounted LED lamps, wire, and all necessary terminal ends. The two lamps mounted to the bumper clamp will serve as running lights as well as brake lights when the brakes are applied. U.S.A.
Any warranty claims must be handled directly with manufacturer per instructions included with product.
The Brake & Run kit is designed to give you additional visibility on the rear of your vehicle. The small controller can be mounted directly to our A-14304 fuse panel bracket or any other convenient location. kit includes controller, 2 red universal mounted LED lamps, wire, and all necessary terminal ends. The two lamps mounted to the rear of the vehicle will serve as running lights as well as brake lights when the brakes are applied. U.S.A.
Any warranty claims must be handled directly with manufacturer per instructions included with product.
Black painted teacup style tail lamps with a polished stainless rim and LED style lenses. Epoxy coated plastic lenses are fully sealed to keep moisture out. 1929-31. Left tail lamps have the lens on the bottom to shine on the license plate.
When using for turn signals, you'll have to add a ballast resistor A-13464 if using thermal style flashers. If you're using an electronic style flasher, you won't need the resistor.
12 volt negative ground, left side, lens is all red with a blue dot in the top.
Black painted teacup style tail lamps with a polished stainless rim and LED style lenses. Epoxy coated plastic lenses are fully sealed to keep moisture out. 1929-31. Left tail lamps have the lens on the bottom to shine on the license plate.
When using for turn signals, you'll have to add a ballast resistor A-13464 if using thermal style flashers. If you're using an electronic style flasher, you won't need the resistor.
12 volt negative ground, right side, lens is all red with a blue dot in the top portion.