The black plastic inserts that go at the base of the headlamp where the wires butt together. This is what joins the contacts in your headlight sockets to the wires coming into the headlamp from your lighting wire harness.
The headlamp conduits are what holds these and the wires in place.
Use A-14584-AR if you have the early 1928-29 headlamp buckets with the 11/16" I.D. socket holder in the base of the headlamp.
The later 1929-31 headlamp buckets had the larger 13/16" I.D. socket holder in the base of the headlamp and used the A-14584-B plugs. U.S.A.
Rim only for the headlamp.
Adjustable LED headlamp bulb. This bulb works on 6, 8, and 12 volt applications and will work on positive or negative ground. Bulb give you a true high and low beam pattern with a bright white light. Only draw 1.3 amps on low or high beam. Bulb can be rotated for different pin orientations on headlamp sockets.
Our standard A-13007-LEDX bulbs can't be used on a model T due to the pin orientation in the socket which positions the beam up and down instead of side to side. Since this bulb has an adjustable base, it will give the correct light pattern on any vehicle!
