Part #
A-13000-SA
Model Year
28-29
Part #
A-13000-SB
Model Year
28-29
Part #
A-13000-S12Q
Model Year
28-29
Part #
A-13000-AQSTS
Model Year
28-29
Complete headlamps for the 1928-29 Model A's. Ready to bolt on, sold in pairs only. All headlamps are sold with the later style A-13060 headlamp lenses, NOT the early fluted style. Headlamp buckets and rims are polished stainless.
Part #
A-13000-SSA
Model Year
30-31
Part #
A-13000-SSB
Model Year
30-31
Part #
A-13000-SS6SB
Model Year
30-31
Part #
A-13000-BQSTS
Model Year
30-31
Complete stainless steel headlamps for the 1930-31. Sold in pairs only. Very nice quality!
Part #
A-13075-S
|
Model Year
29-31
When putting sealed beam bulbs or the quartz adapter kit in Model A buckets, you will need these connectors. They press in the old hole where the original socket stuck out, use to fasten the headlight conduit. U.S.A.
Part #
A-13076
|
Model Year
28-31
These brass wire terminals were used on the ends of the wires of the lighting wire harness that came from the bottom of the steering column and connected to the headlamps. If you have 1-bulb headlamps, you'll need 4 per car, 2-bulb headlamps will need 6. If you're ordering one of our lighting wire harnesses, the wires will already have these terminals installed. U.S.A.
Part #
#2136
Model Year
28-31
Part #
#2136-SS
Model Year
28-31
Set of 4 bolts, nuts, and lock washers that hold the headlamp bar to the front fenders. The stainless bolts have polished heads.
Part #
A-13017
|
Model Year
28-31
A cad plated spring for the headlight latch. U.S.A.
Part #
A-13003-MB
|
Model Year
28-31
Two nuts and lock washers to mount the headlight to the headlight cross bar. U.S.A.
Part #
A-13002
|
Model Year
28-31
The special bolt that sticks out the bottom of the headlamp. Cad plated. U.S.A.
Part #
A-13066
|
Model Year
28-31
Strong and flexible neoprene gaskets that set into the reflectors and seal against the lens. Neoprene won't dry out and lose its shape like cork. U.S.A.