Head Light

6-Volt LED bulb that is a direct replacement for the A-13466 bulb used in dash lamps, dome lamps, cowl lamps, and the parking lamp in the headlight and tail lamps. 18 Candle Power and works in both positive and negative ground applications.

Highly reflective aluminum finish that provides the same reflective quality as the original silvered reflectors. The finish is sealed so it won't tarnish like silver. Other reproductions don't have the proper depth to allow the head lamp bulbs to focus properly.

For the street rodder, we offer these stainless steel dropped head lamp bars. Can not be used with 1932 Shells.

This is what they call the fluted lense. It was used from 28 until March of 29. Exactly as original. U.S.A.

The screw goes through the hole in the back of the headlight, and the spring goes between the socket and the back of the light to adjust beam. U.S.A.

This style of lens was used from March of 29 until the end of production. U.S. made with Ford script. Overall diameter is 8-1/2", raised portion that protrudes through rim is 7-7/8". U.S.A.

This strap is riveted inside the headlamp bucket to hold the A-13002 bolt in place. If your headlights still have the original rivets in them, get the A-13011-MB screws that look like rivets for installing this strap.

The complete socket assembly for the Model A headlights. These are what your bulbs plug into inside the headlamp and also what your headlamp conduit couples to at the bottom of the headlamp.