Part #
A-5455-N
|
Model Year
28-32
Special castle type nuts for the front spring U bolts. 4 nuts, 4 cotter pins. U.S.A.
Part #
A-1193
|
Model Year
28-31
The castle nuts that hold the front hub on the spindle. U.S.A.
Part #
A-342-S
|
Model Year
28-31
10/32" x 1/2" screws to mount the garnish molding to the door. Included in the interior trim screw kit. U.S.A.
Part #
#46-BE
|
Model Year
30-30
Used in early 1930, this kit fastens the back edge of the gas tank to the body. This kit uses 1/4" bolts instead of 5/16" like the later 1930 production. The kit contains 12 bolts, 12 nuts and 12 lock washers.
Part #
#46-B
|
Model Year
30-31
5/16" fine threaded bolts and nuts used to hold the back edge of the gas to the body. Some cars used a 1/4" coarse thread bolts, use #46-BE for those applications.
Part #
#46
|
Model Year
30-31
Pan head screws and star washers to anchor the front edge of the gas tank to the firewall.1930-31 only.
Part #
A-17275-MB
|
Model Year
28-31
Two fine threaded bolts and lock washers needed to bolt the gear and case to the torque tube. U.S.A.
Part #
A-10151
|
Model Year
28-34
Bolt, nut, and lock washer for mounting the generator to the front of the motor. 1928-31. U.S.A.
Part #
A-10143-A
Model Year
28-31
Part #
A-10143-B
Model Year
28-32
Special thin headed bolts with internal tooth lock washer. Two different sizes were used. U.S.A.