Part #
A-9770-MB
|
Model Year
28-31
Three wood screws used to attach the footrest base to the floorboard. U.S.A.
Part #
A-2011-MB
Model Year
28-31
Part #
A-2011-HMB
Model Year
28-31
The correct old-style bolts with the shank drilled for cotter pins. The set will do two wheels. The half set is for 1 wheel. U.S.A.
Part #
A-17754-MB
Model Year
28-29
Part #
A-16527
Model Year
30-31
Part #
A-16528
Model Year
30-31
Front bumper bracket to frame hardware kits. 1928-29's used a normal bolt & nut, 1930-31 used some special tall headed bolts. The special tall headed bolt also served as the anchoring point for the radiator apron. U.S.A.
Part #
A-6033-N
|
Model Year
28-30
Special castle nut & cotter pin that mounts the front motor mount yoke in the cross member. U.S.A.
Part #
A-16026-MB
Model Year
28-31
Part #
A-16027-MB
Model Year
28-31
The hardware needed to mount the front fender brace to the frame. Does both left and right braces. U.S.A.
Part #
#22
Model Year
28-29
Part #
#24
Model Year
30-31
On 1928-29's these pass through the hood shelf, fender and into the radiator apron. 1930-31's go through the fender and into the frame and radiator apron.
Part #
A-1107
Model Year
28-32
Part #
A-1107-Q5
Model Year
Wheel studs that secure the hub and drum together. Made just like the originals except the shoulders of these are slightly longer to accommodate the extra thickness of cast iron drums which everyone is using today. If you are going to use these with stamped steel drums, you'll have to machine the length of the shoulder down. MUST be swedged in place using our A-1109-T tool in a hydraulic press. Available individually or in sets of 5. U.S.A.
Part #
A-6030-MB
|
Model Year
28-31
The bolts needed to bolt the front motor mount yoke to the motor. U.S.A.
Part #
A-5330-MB
|
Model Year
28-31
Two hex headed bolts with square nuts to bolt the front spring clip.