Show 45 Of 179
Showing 45 Of 179 results
Part # A-6200-N | Model Year 28-34
The castle nut needed to hold the rod cap to the rod. Includes cotter pin, Grade #5. U.S.A.
Part # #37 Model Year 28-31
Part # #37-SS Model Year 28-31
A complete set of cotter pins for doing the chassis and driveline.
Part # A-16740-MB | Model Year 30-31
Set of three special pan headed bolts used when installing the 1930-31 cowl lacing. They are included in the cowl lacing kit. U.S.A.
Part # A-13327 | Model Year 30-31
This bolt is for the 1930-31 cowl lights. It is drilled to allow the wire to pass through. This is the one that mounts the light to the body. U.S.A.
Part # A-13300-BT | Model Year 28-31
Stainless screws with special shake-proof washers used to bolt the cowl light arm to the cowl light bucket. U.S.A.
Part # A-2478/79-MB | Model Year 28-31
Drilled bolts with castle nuts and cotter pins for holding the cross shaft brackets to the frame. 1 set does both sides. U.S.A.
Part # A-10505-MB | Model Year 28-48
Two screws and lock washers to hold the cutout to the generator. U.S.A.
Part # A-6064-S | Model Year 28-31
The correct thick nuts for the head. Zinc plated, just like the originals. 14 to a set. U.S.A.
Part # #15 | Model Year 28-31
Chrome bolt set to mount dash panel. Kit includes eight 10/32 x 1/2 screws, 4 have #10 heads for the 1928-30 style panels and 4 have #12 heads for the later 1930-31 panels. U.S.A.