Part #
A-9510-MB
|
Model Year
28-31
The two bolts and lock washers used to bolt the carb to the intake. U.S.A.
Part #
#50
|
Model Year
28-31
Set gives you: (7) 1/2-20 Used throughout the chassis of the model A." (23) 3/8-24 (10) 5/16-24 (12) 7/16-20 (6) 9/16-18
Part #
A-5345-F
Model Year
28-48
Part #
A-5345-R
Model Year
28-32
Square headed center spring bolts with nuts. 1928-31. U.S.A.
Part #
A-6064/66-HD
|
Model Year
28-31
Complete set of studs and nuts for the head. Includes the slightly longer stud for the stamped ignition clamp.
Studs are made of 8740 chrome-moly steel. Guaranteed not to stretch, grade 8 nuts. U.S.A.
Kit includes:
2 long studs for water outlet
11 short studs
1 ignition clamp stud for stamped steel style clamp
14 head nuts
Part #
#109
|
Model Year
28-31
Each set contains 9 of these small headed 5/16-24 x 1/2" screws which is enough for one door. Fastens the door hinge to the door. Fits closed cars. U.S.A.
Part #
A-6380-MB
|
Model Year
28-31
Complete set of bolts and lock washers to bolt the clutch housing to the flywheel housing.
Part #
A-7006-MB
|
Model Year
28-31
4 bolts and 4 lock washers to bolt the transmission up to the clutch housing. U.S.A.
Part #
A-7518-MB
|
Model Year
28-31
Two round headed machine screws and lock washers to hold the inspection plate on top of the bell housing. U.S.A.
Part #
A-12000-MB
|
Model Year
28-31
This is the screw and lock washer set to mount the coil bracket to the firewall. U.S.A.