Part #
#40
|
Model Year
28-31
Kit contains oil fill and drain plugs, clutch housing to flywheel housing bolts, transmission cover bolts, clutch inspection screws, and flywheel dust cover bolts. USA
Part #
#45
|
Model Year
28-31
Complete set of bolts to mount the body to the frame. U.S.A.
Part #
A-18015-MB
|
Model Year
28-31
A set of the special bolts with lock washers, and lock nuts. One kit is enough to bolt all 4 shocks to the frame. 24 pc. set. U.S.A.
Part #
A-8140-MB
|
Model Year
28-31
Set of 4 locking nuts, and 4 rivet headed bolts used to mount the radiator brace rod brackets to the firewall. Gives it the original appearance without riveting! U.S.A.
Part #
A-2499-N
|
Model Year
28-32
Set of 7 nuts used to lock the clevises in place on the brake rods. U.S.A.
Part #
A-17758-N
|
Model Year
28-31
If you are using your original clamps, this kit has all of the nuts and lock washers for the 4 large clamps and the small center clamp. U.S.A.
Part #
A-17787-MB
Model Year
28-29
Part #
A-17785-MB
Model Year
30-31
Part #
A-17786-MB
Model Year
31-31
The correct black oxide bolts that hold the bumper cross brace to the bumper brackets. U.S.A.
Part #
A-17834
Model Year
28-31
Part #
A-17834-SS
Model Year
28-31
A-17834 are special bolts, nuts, and lock washers. Zinc plated, but Henry painted them black. U.S.A.
A-17834-SS are stainless end bolts with nuts and lock washers. The head of the bolt is polished. Lasts a lifetime!
Part #
A-9549-MB
|
Model Year
28-31
Set of four small fine threaded screws that attach the choke and throttle butterflies to the shafts. U.S.A.