Part #
A-6648-MBX
|
Model Year
28-31
For show cars. Thick headed, no head markings. Black oxide finish with copper washers. U.S.A.
Part #
A-6520-MBX
|
Model Year
28-31
For show cars. Thick headed, no head markings. Black Oxide Finish. U.S.A.
Part #
A-4242
|
Model Year
28-48
Castellated nuts used to attach the rear hubs. U.S.A.
Torque to 100 foot pounds.
Part #
A-16181-MB
|
Model Year
28-31
This kit bolts the rear stamped steel fender brace to the body. 1 kit does both sides. Does not fit the cast braces. U.S.A.
Part #
A-081-MB
|
Model Year
28-31
Special large headed bolts that are welded or brazed to the body upon which the rear fenders mount. You'll need four per fender. Note: Not used on pick-ups. U.S.A.
Part #
#46-AR
|
Model Year
28-29
A set of 8 1/4" bolts, nuts, and lock washers used to secure the rear flange of the 1928-29 gas tank behind the dash rail. U.S.A.
Part #
A-16735-AMB
Model Year
28-29
Part #
A-16735-BMB
Model Year
30-31
A set of screws to mount the rear hood retainer to the firewall. U.S.A.
Part #
A-1118
Model Year
28-31
Part #
A-1118-Q5
Model Year
The original type. Fits loose in hole and is tightened when the shoulder is swedged in a press.
Note: Our bolts have longer shoulders for cast iron drums. The shoulder must be turned down for use with original stamped steel drums. U.S.A.
Part #
A-5090-MB
|
Model Year
28-31
Bolts needed to bolt the rear motor mount to the flywheel housing. U.S.A.