Part #
A-3590-MB
|
Model Year
28-31
Special bolt used to attach the pitman arm to the sector shaft on the steering box. U.S.A.
Part #
A-45475-S
|
Model Year
28-31
This set is used to hold the swing arms to the windshield frame. 1 kit does both sides. If your windshield brackets do not have the threaded insert, the female nut in this kit will replace it. U.S.A.
Part #
A-7563-MB
|
Model Year
28-31
Set of 12 bolts and lock washers used to mount the pressure plate to the flywheel. Grade 8. U.S.A.
Part #
#22
Model Year
28-29
Part #
A-115-BMB
Model Year
30-31
Holds the apron in place, 1928-29 uses 4 oval head machine screws that go through the front edge of the fender and into D-nuts that are in the apron. 1930-31 uses a set of four 1/4-28 round head machine screws and lock washers that hold the radiator splash apron on.
These screw into the heads of the special bolts that hold the front bumper brackets on. U.S.A.
Part #
A-8130-F
|
Model Year
28-31
Original style. Authentic drilled bolts, castle nuts, cotter pins, springs and pads. U.S.A.
Part #
A-8130-S
|
Model Year
28-42
Replacement style that uses regular nuts instead of the authentic castle type nuts.
Part #
A-8200-BS
|
Model Year
28-31
A set of 4 bolts, nuts, and lock washers that are needed to install the radiator shell on the radiator. U.S.A.
Part #
A-4750-MB
|
Model Year
28-32
This is the larger sized bolt, nut and cotter pin that attach the rear radius rods to the torque tube just behind the U-joint. U.S.A.
Part #
A-6676-MBX
|
Model Year
28-31
For show cars. Thick headed, no head markings. Black oxide finish. U.S.A.