Part #
A-10151-B
|
Model Year
28-31
Bolt, nut, and lock washer for mounting the alternator bracket to the front of the motor. This bolt is slightly longer than the normal generator bolt since most alternator brackets are made out of 1/4" thick steel. 1928-31. U.S.A.
Part #
A-2504-MB
|
Model Year
28-31
A 12 piece set for mounting both types of anti-rattle springs. 4 bolts, 4 nuts, 4 washers. U.S.A.
Part #
A-4035-MB
|
Model Year
28-31
Original style bolts used for securing the right and left axle housing to the axle center section. 20 bolt set. U.S.A.
Part #
A-5154
|
Model Year
28-31
The special studs and nuts that hold the battery support in the frame, and they also hold the battery frame or clamps in place. U.S.A.
Part #
A-16100-MB
|
Model Year
28-31
1/4" carriage bolts that attach the outer edge of the fender to the fender brace. Nuts and lock washers included. One set does all 4 fenders. U.S.A.
Part #
A-37707
|
Model Year
28-31
The coarse threaded carriage bolt that the prop nut screws on to. Used on Roadsters and Roadster Pickups. Used to secure the top irons to the A-74070 or A-42070-AR bracket that sticks out of the body. U.S.A.
Part #
#18
|
Model Year
28-29
Screws and nuts used to mount the dash rail under the windshield.
Part #
#20
|
Model Year
30-31
This kit is used for securing the 1930-31 dash rail to the body. It contains 5 chrome oval head screws that got through the face of the dash rail and 2 pan head screws and lock washers that secure the tabs at the bottom of the dash rail to the door post. 9 piece set. U.S.A.