Part #
A-10005-A
|
Model Year
28-29
All new so no core is required. This is the "long nose" style used in 1928-29 that was supported by a bearing on one end and a bushing at the other. Unit is balanced.
Part #
A-10005-AR
|
Model Year
28-29
All new so no core is required. This is for the early "long nose" style generator that had bearings on both ends of the armature. Units are balanced.
Part #
A-10005-BR
|
Model Year
30-31
All new construction, not a rewound unit. This is the later style short nose version with the 1/2" long snout. See the illustration.
Part #
A-10142-OR
|
Model Year
28-31
Duplicate of the original band that covers the slots for accessing the brushes. Comes with the mounting hardware. U.S.A.
Part #
A-10093-AR
|
Model Year
28-28
This bearing was used only on the 1928 powerhouse style generators. Larger of the 2 used on the front of the main shaft. .7877 I.D.
Part #
A-10098
|
Model Year
29-31
This piece was originally riveted to the generator end plate. U.S.A.
Part #
A-10097
|
Model Year
29-32
Sits on armature shaft just forward of the bearing. U.S.A.
Part #
A-10114
|
Model Year
29-32
Flat washer that goes between the bearing and the felt washer. U.S.A.