Part #
A-10002-A12
|
Model Year
28-31
When you need "BIG" power! 12 volt, 100 amp, negative ground alternator. Built using all new components, this unit comes with mounting bracket and tension brace. Special 2" pulley for use with stock size Model A fan belts. New style fan will keep this unit running cool. U.S.A.
Part #
A-10001-MK
|
Model Year
28-31
When setting up your own alternator, this kit gives you the brackets to bolt the alternator where the generator was mounted along with a tension brace. U.S.A.
Part #
A-10003
|
Model Year
28-31
If you're building your own Delco style alternator, this kit gives you the mounting bracket, tension brace, and pulley to adapt to the Model A. U.S.A.
Part #
A-10002
|
Model Year
28-34
"H" bracket used to mount the alternator in place of the generator. Adjusts with washers so you can shift the alternator forward or backward for belt alignment. U.S.A.
Part #
A-10131-A
|
Model Year
28-31
This is a new and improved part! A smaller diameter pulley turns the alternator 2.6 times the engine speed which allows the alternator to "turn on" quicker. Fits any Delco or Ford alternator with a .670 shaft size. "Genuine Nu-Rex." 2-1/4" O.D. U.S.A.
Part #
A-10001-A12
Model Year
28-31
Part #
A-10001-A
Model Year
28-31
Part #
A-10001-AHD
Model Year
28-31
These are a must for running the quartz sealed beam headlights or if you just simply want a more reliable charging system.
These alternators are new and include a five year warranty. Includes an adjustable bracket that allows the alternator to move 1/4" front to back. Sold outright, so there is no need to send in a core. Comes with tension brace.
Now they have the new Max-R pulley that drives at three times the engine speed. Fits 1928-31. 12 volt units are negative ground only, and 6 volt units are positive ground only. Mounting bracket is adjustable so the alternator can be shifted for proper belt alignment! If you are running the quartz 6 volt bulbs, it is best to go to the 60 amp unit. "Genuine Nu-Rex," U.S.A.
Part #
A-10864
|
Model Year
28-31
The trim ring only for the amp meter. Chrome plated. If you are ordering a new amp meter, this ring is already on it.
Part #
A-10113
|
Model Year
29-32
The original bearings were not sealed and required a felt and a retainer. This is not needed if you're using modern sealed bearings. U.S.A.
Part #
A-10099
|
Model Year
29-32
Locks into groove of the generator armature shaft just ahead of the bearing spacer (A-10097) U.S.A.