Gauges

|
Show 18 Of 19
Showing 18 Of 19 results
Part # A-8271-2 | Model Year 28-31

This is an electronic American made gauge kit. The gauge is a dual faced gauge that will register your oil pressure as well as the water temperature.

Oil pressure measures 0-15 psi, the water temperature measures 100-260 degrees. The kit includes an electronic oil pressure sender and an electronic water temperature sender.

The gauge will fit any standard 2-1/16" gauge holder bracket (not included). The gauge will work on 6 or 12 volt systems, negative or positive ground!

Both senders mount using 1/8" NPT. If you want the gauge to be illuminated, you must purchase the illumination kit separately. 1928-31.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$179.95 EA
Part # A-11808-A Model Year 28-31
Part # A-11808-B Model Year 31-31
A beautiful copy of the old APCO gauge bracket that mounted on the steering column at the support. The early style is for A's that had the support coming from the bottom of the gas tank. The late style is for 1931's that had the steering column support that bolted behind the dash rail. Holds the 2-1/16" size gauges. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-6602-H | Model Year 28-31
Use this kit to attach an oil pressure gauge to your Model A. Kit contains 5' of COPPER tubing, not plastic, elbow fitting for attaching to motor, and a straight fitting for attaching to the gauge. On a Model A, you remove the A-6621 oil pump hole plug and replace it with the male threaded fitting in this kit. The oil pump oil plug is the slotted pipe plug on the side of the block (middle) between the oil pan and the valve cover.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$14.50 EA
Part # A-10606 | Model Year 19-31
No need to change or modify the stock gauges or senders. Just install the electronic voltage reducer on the back of each gauge, and the gauges will continue to run on 6-volts, while the rest of the vehicle is 12-volts. Works on fuel, oil pressure, and water temperature gauges. Use all the stock 6-volt sending units. This electronic voltage reducer stabilizes the voltage output at 6-volts and eliminates fluctuations in the gauges typical with cheap resistor conversions.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$18.50 EA
Part # A-8271-3 | Model Year 28-31

This is an electronic American made gauge kit. The gauge is a dual faced gauge that will register your oil pressure as well as the water temperature.

Oil pressure measures 0-15 psi, the water temperature measures 100-260 degrees. The kit includes an electronic oil pressure sender and an electronic water temperature sender.

The gauge will fit any standard 2-1/16" gauge holder bracket (not included). The gauge will work on 6 or 12 volt systems, negative or positive ground!

Both senders mount using 1/8" NPT. If you want the gauge to be illuminated, you must purchase the illumination kit separately. 1928-31.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$87.50 EA
Part # A-11806-AS Model Year 28-30
Part # A-11806-BS Model Year 30-31
This bracket uses the two lower instrument panel mounting screws so there are no holes to drill. Holds the 2-1/16" size gauges. Black painted steel. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-12119-A Model Year 28-31
Part # A-12119-B Model Year 28-31
Part # A-12120-A Model Year 28-31
Part # A-12120-B Model Year 28-31
Part # A-12119-LK Model Year 28-31
Part # A-12120-LK Model Year 28-31

These gauges are available in 6 or 12-volt and will fit any standard gauge holder that accepts a 2-1/16" gauge. Gauge bracket not included.

You will find available brackets listed in the "gauges and switch" sections of the web site. Light kit must be purchased separately if you want the gauge to illuminate at night. Wiring instructions included. U.S. Made!

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-12120-LK | Model Year 28-31
Our tachometers do not come with a light. This kit is what you need to illuminate your tachometer if you so desire. 12-volt. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$10.95 EA
Part # A-12119-LK | Model Year 28-31

Our tachometers do not come with a light. This kit is what you need to illuminate your tachometer if you so desire. 6-volt. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$11.95 EA