Gauges

|
Show 9 Of 20
20 Results
Part # A-10850-C | Model Year 28-31
This is the later style used by Ford in 1926-27. Use an adapter (T-5017-D) for use in earlier switch panels. Same amp meter was used by Ford from 1928 through 1931. Quality is fair! 30-30 amp.
DISCONTINUED
Temporarily
OUT OF STOCK
$14.50 EA
Part # A-10864 | Model Year 28-31
The trim ring only for the amp meter. Chrome plated. If you are ordering a new amp meter, this ring is already on it.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.25 EA
Part # A-6602 | Model Year 28-31

A low pressure gauge for Model A's. Measures 0-10 pounds

INCLUDES THE HOOK-UP KIT TO INSTALL.

Fits any standard 2-1/16" gauge holder bracket (not included).

DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # A-8272 | Model Year 28-31
Know exactly what temp your motor is running. APCO style gauge that gives you a temperature range of 90 to 250 degrees. The easiest place to mount the probe is to use our A-8273 probe pipe which mounts into the upper radiator hose. Or we offer outlets that are drilled and tapped already to accept the probe. Fits any standard 2-1/16" gauge holder bracket (not included).
DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # #15 | Model Year 30-31
Chrome bolt set to mount dash panel. Kit includes eight 10/32 x 1/2 screws, 4 have #10 heads for the 1928-30 style panels and 4 have #12 heads for the later 1930-31 panels. USA
DISCONTINUED
Temporarily
OUT OF STOCK
$1.50 SET
Part # A-11805-AR | Model Year 28-30
A new dash panel for the price of replating the old one. Nice chrome finish. For oval speedometer.
DISCONTINUED
Temporarily
OUT OF STOCK
$51.95 EA
Part # A-11805-BR | Model Year 30-31
A very nice chrome plated dash panel. This one is for the later round type speedometer.
DISCONTINUED
Temporarily
OUT OF STOCK
$51.95 EA
Part # A-11900-P | Model Year 28-31
A set of rubber discs that go between the dash rail and the body. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.95 SET
Part # A-11807-E Model Year 28-30
Part # A-11807-L Model Year 30-31
Part # WEB-KIT-0805 | Model Year 28-31
Dual gauge bracket that mounts using the same two lower screws that hold the instrument panel in place. Gauge bracket hangs below your dash panel. Chrome plated, holds modern 2-1/16" gauges. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK