Part #
A-9030-B
|
Model Year
30-31
Finally a quality cap is available! Duplicate of the Eaton style cap that fits! Polished stainless with the correct leather gasket.
Part #
A-9155-L311
|
Model Year
31-31
In-line glass type sediment bowl assembly. Has 1/8" NPT female threads in and out for attaching your fuel line/fittings (not included). Same sediment bowl we include in our A-9155-L31. U.S.A.
Part #
A-9240-B
|
Model Year
28-31
Goes from sediment bulb on firewall down to the carb. This is a plated steel line with brass fittings, not for late 31's. U.S.A.
Part #
A-9240-C
|
Model Year
31-31
This gas line was used on the late 31's with the indented firewall. You must have the late 31 side bowl style carb to use this line. Comes with correct late '31 fittings. U.S.A.
Part #
A-9243-B
|
Model Year
31-31
The original style 9/16 head gas line fittings that were used on the 1931 Model A's. U.S.A.
Part #
A-9243
|
Model Year
28-31
Brass gas line fittings like the originals. This early style has a 1/2" hex. Ferrule included. U.S.A.
Part #
A-9193
|
Model Year
28-31
Try this before you buy a new valve. U.S.A.
Part #
A-9299-A1
Model Year
28-29
Part #
A-9299-S
Model Year
28-29
Part #
A-9299-B
Model Year
30-31
This thin material goes around the gas tank wherever the beaded cowl welt isn't used. U.S.A.
Part #
A-35266-MB
|
Model Year
28-29
A set of 10 hex head bolts with heavy hex jam nuts used for holding the gas tank clamps A-35266-AR together. Originally these bolts were a 3/8" headed bolt but those are unavailable.