Show 8 Of 8
Showing 8 Of 8 results
Part # A-5008 | Model Year 28-31
On 1930-31 Coupes, this plate was spot welded on top of the sub rail between the fender well and the seat riser where the rear body mounting bolt installed. Can be used on other body styles. 2 required per car.
Part # A-5075-R | Model Year 28-31
These rivets are used to attach A-5075 body brackets and A-5100 Hood Handle Brackets to the frame. 4 per set, 5/16" x 5/8" round head.
Part # A-5125-MB | Model Year 28-31
Set of round headed bolts with lock washers and nuts. Round heads to resemble rivets. One set does all 4 brackets. Mounts running board brackets to the frame.
Part # A-5075 | Model Year 28-31
This is the bracket that is riveted to the frame rail, and the front of the body mounts to it. U.S.A.
Part # A-5100 | Model Year 28-31
This bracket is the one riveted to the frame that the rear hood clip is bolted to. U.S.A.
Part # A-5005-CH | Model Year 28-31
If the front of your frame got in a fight with another car and lost! These will fix it. Sold in pairs and you will have to put the holes in them. U.S.A.
Part # RA-1003 | Model Year 29-31
Ten 5/16" D. X 1" Lg. Round Head Rivets, Two 5/16" D. X 1-1/2" Lg Round Head rivets.
Complete set of rivets for attaching the running board brackets to the frame rails. U.S.A.
Part # A-5125-A Model Year 28-31
Part # A-5130-A Model Year 28-31
Part # A-5130-B Model Year 28-31
Part # WEB-KIT-0649 | Model Year 28-31
Pressed steel running board brackets. They were originally riveted to the frame. We sell both rivets and bolts to mount them. U.S.A.