Show 7 Of 7
Showing 7 Of 7 results
Part # A-3407-X | Model Year 26-31
A heavy grade of asphalt treated cotton webbing that sits on the frame. Treated so it will not rot. One roll is enough for a car. Welt is 1-1/2" wide, 1/16" thick, 20 ft. long. U.S.A.
Part # A-5000-P Model Year 28-29
Part # A-5001-P Model Year 28-31
These rubber pads were nailed to the body mounting blocks to align the doors and the hood. U.S.A.
Part # A-5007 | Model Year 28-31
Steel washer used for cars / trucks with wooden sub rails. Used where the body bolts pass through the wood sub rails.
Part # A-5006 | Model Year 28-31
Steel washers used for cars / trucks with wooden sub rails. Used where the body bolts pass through the wood sub rails.
Part # A-5001-05 Model Year 28-29
Part # A-5001-06 Model Year 28-29
Part # A-5001-07 Model Year 28-29
Part # A-5001-15 Model Year 30-31
Part # A-5001-16 Model Year 30-31
Part # A-5001-17 Model Year 30-31
Part # A-5001-18 Model Year 31-31
Good quality hardwood blocks that go between the sub rails and the frame. Complete set for the car or truck. If you don't see your car listed, then you probably don't need them.
Many of the 4-doors and other cars had wooden sub rails instead of steel. They don't use the body mounting blocks. Passenger=Coupe, Roadster, Phaeton. Sold in sets only. U.S.A.
Part # #45 | Model Year 28-31
Complete set of bolts to mount the body to the frame. U.S.A.
Part # A-5002-P | Model Year 28-31
Set of 6 round rubber shims used under the front of the cowl to align the doors and hood.