Part #
A-35244
|
Model Year
28-31
Round rubber pad and mounting tacks to seal out the dust in the summer, and the cold air in the winter. Just like the original. Nails to the floorboard. U.S.A.
Part #
A-35150-A
Model Year
28-29
Part #
A-35150-B
Model Year
29-31
The cover that snaps into the opening over the battery in the floorboards. Made of heavy gauge steel with spring steel retaining clips riveted in place as original. Powder coated black. U.S.A.
Part #
#34-C
|
Model Year
28-31
Set of black oxide screws and special washers for mounting the center and rear floorboards in the Tudor Sedan. U.S.A.
Part #
#33-C
|
Model Year
28-31
Set of black oxide screws and special washers for mounting the floorboards in the car. U.S.A.
Part #
A-35130/31-X
|
Model Year
28-29
Same as our A-35130/31-A floorboards for vehicles with the emergency brake to the front of the gear shift lever EXCEPT the main board is made in 2 pieces and includes special metal plate and screws for joining the 2 boards together. This makes access to removing or installing a battery a breeze! U.S.A.
Part #
A-35130/31-BX
|
Model Year
29-31
Same as our A-35130/31-B floorboards for vehicles with the emergency brake to the right of the gear shift lever EXCEPT the main board is made in 2 pieces and includes special metal plate and screws for joining the 2 boards together. This makes access to removing or installing a battery a breeze! U.S.A.
Part #
A-35220
|
Model Year
28-28
Early 1928's with the emergency brake to the left had this plate installed in the floorboards to allow access to grease the clutch release bearing. U.S.A.
Part #
A-35130-S
Model Year
28-31
Part #
A-35130-S2
Model Year
28-31
Black cotton webbing with tacks that gets put around the edge of the floorboards to seal them up. Nails to outside edge, then folds under the board and gets nailed to bottom as well.
If you have a Tudor Sedan, you will also need kit. A-35130-S2 to do the center and rear boards. U.S.A.
Part #
A-35130/31-A
Model Year
28-29
Part #
A-35130/31-B
Model Year
29-31
A 2 piece set for the front of your Model A. All holes are drilled for mounting. The finest you can buy! Made from 3/4" 7-ply birch hardwood veneer. U.S.A.