Valves & Tappets
Show 9 Of 14
Showing 9 Of 14 results
Part # A-6500-SLOS Model Year
Part # A-6500-DLOS Model Year 28-34
Part # WEB-KIT-0694 | Model Year 28-34
The double lock tappets are .005" larger and the single lock is .015" larger to accommodate badly worn blocks. Block must be reamed in order to use these tappets. Standard tappet dia. is .5930/.5935". Base diameter of single locks is 1.11o", double locks are .990." U.S.A.
Part # A-6520-MBX | Model Year 28-31
For show cars. Thick headed, no head markings. Black Oxide Finish. U.S.A.
Part # A-6505-SS Model Year 28-31
Part # A-6505-SS-Q8 Model Year
Part # WEB-KIT-0695 | Model Year 28-34
Just like the stock valves except we make these out of stainless for long life! Will work in 1928-31 Model A's and in the 1932-34 4-cylinder B motors.
Part # A-6500-DL Model Year 28-31
Part # A-6500-DL-Q8 Model Year
Part # A-6500-SL Model Year 28-31
Part # A-6500-SL-Q8 Model Year
Part # WEB-KIT-0693 | Model Year 28-34
Very well made tappets. Available in either single lock or double lock. Either tappet will do the same job, single locks are just easier to adjust. Fits 1928-34's. Base dia. of single locks is 1.110" , double locks .990" American made!!
Part # A-6520-MB | Model Year 28-31
10 bolts and lock washers needed to bolt the valve cover on. Cad plated.
Part # B-6521 | Model Year 32-34
For the B and C 1932-34 4-cyl. motors. U.S.A.
Part # A-6521 Model Year 28-31
Part # A-6521-C Model Year 28-31
Part # WEB-KIT-0699 | Model Year 28-31
Paper or cork. Cork is a special compound with 90% memory for positive sealing.
Part # A-6500-VGT | Model Year 28-34
This hardened steel driver is a quality reproduction of a K.R. Wilson tool. It provides easy removal of the most stubborn guides. Complete with instructions. U.S.A.