Part #
A-6648-MB
|
Model Year
28-31
Two bolts with special copper washers for mounting the oil return pipe. U.S.A.
Part #
A-8271-3
|
Model Year
28-31
This is an electronic American made gauge kit. The gauge is a dual faced gauge that will register your oil pressure as well as the water temperature.
Oil pressure measures 0-15 psi, the water temperature measures 100-260 degrees. The kit includes an electronic oil pressure sender and an electronic water temperature sender.
The gauge will fit any standard 2-1/16" gauge holder bracket (not included). The gauge will work on 6 or 12 volt systems, negative or positive ground!
Both senders mount using 1/8" NPT. If you want the gauge to be illuminated, you must purchase the illumination kit separately. 1928-31.
Part #
A-6600-BX
|
Model Year
28-34
New oil pump that fits 1928-31 Model A's and 1932-34 4-cylinder motors. Import.
Part #
A-6616
|
Model Year
28-31
Flat steel plate that bolts to the bottom of the oil pump. U.S.A.
Part #
A-6616-MB
|
Model Year
28-31
The 4 short fine threaded bolts and lock washers that hold the bottom plate onto the oil pump. U.S.A.
Part #
A-6612-AR
Model Year
28-29
Part #
A-6612
Model Year
28-31
Bushings only for the oil pump. The earlier bushings had a little larger O.D. of around .654. The later style is the most common. U.S.A.
Part #
A-6619
|
Model Year
28-31
Goes between oil pump housing and cover plate on bottom of pump. U.S.A.
Part #
A-6551
|
Model Year
28-34
Check this gear for wear when you overhaul your engine. It performs a very important job, and takes a heck of a beating! Available in standard size or oversize if your gear on the camshaft has a lot of wear. The .004 oversize has teeth that are .004" wider than the stock teeth, .010" oversize is .010" wider than standard.
Part #
A-6542
|
Model Year
28-34
Complete oil pump drive gear assembly ready to drop in. Everything has been assembled for you.