Oil Pump & Pan

|
Show 9 Of 62
Showing 9 Of 62 results
Part # A-6542-004 | Model Year 28-34

.004 oversize oil pump drive gear assembly. Assembly includes our A-6551-004 oversize drive gear, A-6561 sleeve and the A-6541 housing. All assembled and ready to drop in.

Fits 1928-31 Model A motors as well as the 1932-34 4-cylinder motors.

DISCONTINUED
Temporarily
OUT OF STOCK
$54.95 SET
Part # A-6542-010 | Model Year 28-34

.010 oversize oil pump drive gear assembly. Assembly includes our A-6551-010 oversize drive gear, A-6561 sleeve and the A-6541 housing. All assembled and ready to drop in.

Fits 1928-31 Model A motors as well as the 1932-34 4-cylinder motors.

DISCONTINUED
Temporarily
OUT OF STOCK
$54.95 SET
Part # A-6602 | Model Year 28-31

A low pressure gauge for Model A's. Measures 0-10 pounds

INCLUDES THE HOOK-UP KIT TO INSTALL.

Fits any standard 2-1/16" gauge holder bracket (not included).

DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # A-6727-AR | Model Year 28-28
The 1928 oil pans had a clean out on the oil pan directly under where the oil pump is. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.75 EA
Part # A-6751 | Model Year 28-31
This little gadget is actually a duplicate of an accessory that was manufactured by APCO back in the Model A days! Mounts under the head nut above the water inlet on the side of the block. This has a piece of felt in it so all you do is drag your dipstick through it to clean the oil from the dipstick. Stainless steel. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$24.95 EA
Part # A-6734-C Model Year 28-31
Part # WEB-KIT-0702 | Model Year 28-31
The authentic copper gaskets with an fiber core just like Ford used. Model A's and T's used this on the oil pan of the motor and Model T's used this same gasket for the oil plug on the rear end of 1909-25's. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # T-3080-RK | Model Year 09-31
Kit allows you to repair a stripped oil drain plug hole without removing the motor from the car. Special adapter threads into what is left of your old hole, cutting new threads as it goes in. Adapter accepts new style smaller drain plug that is included. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$18.50 KIT
Part # A-6541 | Model Year 28-31
This is the housing that the A-6551 oil pump drive gear spins in. Mounts in valve chamber. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$18.50 EA
Part # A-8271-2 | Model Year 28-31

This is an electronic American made gauge kit. The gauge is a dual faced gauge that will register your oil pressure as well as the water temperature.

Oil pressure measures 0-15 psi, the water temperature measures 100-260 degrees. The kit includes an electronic oil pressure sender and an electronic water temperature sender.

The gauge will fit any standard 2-1/16" gauge holder bracket (not included). The gauge will work on 6 or 12 volt systems, negative or positive ground!

Both senders mount using 1/8" NPT. If you want the gauge to be illuminated, you must purchase the illumination kit separately. 1928-31.

DISCONTINUED
Temporarily
OUT OF STOCK
$154.00 EA