Connecting Rods

|
Show 9 Of 12
12 Results
Part # B-6211-STD Model Year 32-34
Part # B-6211-010 Model Year 32-34
Part # B-6211-020 Model Year 32-34
Part # B-6211-030 Model Year 32-34
Part # B-6211-040 Model Year 32-34
Part # WEB-KIT-0679 | Model Year 32-34
New forged connecting rods with insert bearings. These rods are made to accept the original style wrist pins. Sold in sets of 4 with bearings. 1932-34. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # B-6213-STD Model Year 32-34
Part # B-6213-010 Model Year 32-34
Part # B-6213-020 Model Year 32-34
Part # B-6213-030 Model Year 32-34
Part # B-6213-040 Model Year 32-34
Part # WEB-KIT-0680 | Model Year 32-34

If you have already purchased a set of our new "B" style connecting rods, these are the replacement bearing kits that fit them. A set is enough to do 4 rods. 1932-34, 4 cylinder.

NOTE: If boring out original rods to accept these bearings, the bore specification is 2.0210/2.0215". U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-6201-X | Model Year 28-31
This is a set of new forged connecting rods WITH standard bearings. They fit the first generation of the Burlington crankshaft that were machined to 1.498/1.499." The later generation of the Burlington crankshaft was machined to match the original Ford spec of 1.499.1.500." Limited quantity.
DISCONTINUED
Temporarily
OUT OF STOCK
$580.00 SET
Part # A-6201-MB | Model Year 28-31

If you have purchased a set of our new forged connecting rods made for insert bearings, these special bolts hold the cap in place. These fit the style of rods that have the inserts that wrap around the edges of the rod. New rods will already have these included. Once torqued, they will stretch and should not be reused. Solid individually.

Torque to 20 foot pounds.

DISCONTINUED
Temporarily
OUT OF STOCK
$2.50 EA
Part # A-6200-N | Model Year 28-34
The castle nut needed to hold the rod cap to the rod. Includes cotter pin, Grade #5. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 EA
Part # A-6220 | Model Year 28-34
A set of 8 laminated shims for all four rods. Just peel off a layer for adjustment. .030 thick. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$7.95 SET
Part # A-6200-STD Model Year 28-31
Part # A-6200-010 Model Year 28-31
Part # A-6200-020 Model Year 28-31
Part # A-6200-030 Model Year 28-31
Part # A-6200-040 Model Year 28-31
Part # B-6200-STD Model Year 32-34
Part # B-6200-010 Model Year 32-34
Part # B-6200-020 Model Year 32-34
Part # B-6200-030 Model Year 32-34
Part # WEB-KIT-0676 | Model Year 28-34

Rebabbitted rods for your Model A. These are sold on exchange only!

We must have your old rods before we can send out new ones. Sorry, no exceptions.

Come with new wrist pin bushings installed. Wrist pin bushing must be reamed to fit your piston pin. Standard A rod = 1.500." U.S.A.

The B series part numbers fit the 1932-34 4cyl which have 1-7/8" standard rod journals.  

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-6201 | Model Year 28-31

Say "goodbye" to adjusting the clearance with shims by using these Ford Model A connecting rods with superior lubrication, reduced friction and longer bearing life. Forged using high tensile strength SAE 4140 chrome moly hardened and tempered steel. Rods have wrist pin bushing pressed in, oil holes drilled, and rough bored. Rods are sold individually without the insert bearings. Order the needed size of bearings in addition to the rods. When 4 rods are ordered, they will be weight matched. These Model A connecting rods are made to accept the A-6204 style of insert bearings that wrap around the edges.

Torque bolts to 20 foot pounds.

DISCONTINUED
Temporarily
OUT OF STOCK
$97.00 EA
Part # A-6211 | Model Year 28-31

"H" beam style rod manufactured by SCAT for high horsepower applications.  Rod uses stock style wrist pin.  Bearing inserts must be purchased separately. Rods do not have oil dippers, designed for pressurized engines. Chrome Moly.  

Sold in weight matched sets of 4 only.

Available insert bearings (same as used in the model T stroker rods with "A" journals):

T-3024-ASTD     Standard size

T-3024-A010     .010 Undersize

T-3024-A020     .020 Undersize

T-3024-A030     .030 Undersize 

DISCONTINUED
Temporarily
OUT OF STOCK
$595.00 SET