Distributor

|
Show 9 Of 67
67 Results
Part # A-12000-12 | Model Year 19-31
12-volt coil for use on any Model A or Model T running a distributor. Coil bracket must be purchased seperately. Does not require an external resistor.
DISCONTINUED
Temporarily
OUT OF STOCK
$34.95 EA
Part # A-12000 | Model Year 28-34

This is the replacement type 6-volt coil. You must use the coil bracket with this coil. Used on all years of Model A's and Model T''s that are running a distributor.

DISCONTINUED
Temporarily
OUT OF STOCK
$16.50 EA
Part # A-12275-AR Model Year 28-30
Part # A-12275-B Model Year 30-31
Part # WEB-KIT-0816 | Model Year 28-31

If you are going for 100% authenticity, these bronze plug connectors are what you will need. Sold in set of 4. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-12001 | Model Year 28-31
If you are running a 12-volt system, you'll need this if you keep the 6-volt coil. Allows you to use the same old coil on the 12-volt system. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$7.00 EA
Part # A-12145 | Model Year 28-34
Special rivets to hold the distributor clamps to the distributor. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.55 PR
Part # A-12000-CB | Model Year 28-34

Bracket to mount the 1928-34 ignition coil. 

When running a distributor on your T, you need to use a modern style 6 volt coil.  This is the bracket to hold the coil to the firewall or wherever you want to mount the coil. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$2.70 EA
Part # A-12000-MB | Model Year 28-31
This is the screw and lock washer set to mount the coil bracket to the firewall. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.70 SET
Part # A-12116 | Model Year 28-31
Simply place this unit between the distributor cap and the coil wire, and it indicates if you have the wires on your coil properly as well as if you have spark or not. Comes with complete usage instructions, genuine Nu-Rex. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$27.95 EA
Part # A-12300-MS Model Year 28-31
Part # A-12300-W Model Year 28-31
Part # WEB-KIT-0817 | Model Year 28-31
The copper 10/32 screw and fiber washer used to attach the condenser to the tab of the lower plate. For ease of installation, we recommend super gluing the fiber washer to the outside of the lower plate tab. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK