Model B Carburetor

|
Show 18 Of 21
Showing 18 Of 21 results
Part # A-9510-K | Model Year 28-31
"This kit gives you all you need to install the 1932-34 ""B"" carb on your Model A. Gasket, special machined bolts and fittings. U.S.A."
DISCONTINUED
Temporarily
OUT OF STOCK
$32.50 EA
Part # B-9510-S | Model Year 28-31
Kit gives you a larger bore mounting gasket and machined bolts that allow the carb to pivot. By pivoting the carburetor, the Model A choke rod will align. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$15.60 EA
Part # B-9549 | Model Year 32-34
Choke plate for the 1932-34 Zenith carburetor. Zinc plated. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$15.25 EA
Part # B-9558 | Model Year 32-34
Float pin for the 1932-34 "B" Zenith carburetor used on the 4-cylinder motors. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.25 EA
Part # A-9502-B | Model Year 32-33
If your carb has the later 1932 style carb, this is the gasket kit for that carb. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.50 SET
Part # B-9600-HB | Model Year 32-34

Filter assembly simply clamps to the OD of the carburetor throat with a rubber hose and hose clamp. Puts the filter above the carburetor so it is not affected by gas dripping into the element. Element comes pre-oiled and can be cleaned and recharged when necessary. Filter cleaner and oil can be purchased at your local parts store when this is necessary.

Fits left hand drive Model A's that are using the 1932-34 Zenith carburetors. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$79.95 EA
Part # B-9534 | Model Year 32-34
Main jet for the 1932-34 "B" Zenith carburetor used on the 4-cylinder motors. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$13.00 EA
Part # B-9594 | Model Year 32-34
Power jet for the 1932-34 "B" Zenith carburetor used on the 4-cylinder motors. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$6.00 EA
Part # B-9585 | Model Year 32-34
Throttle plate for the 1932-34 Zenith carburetor. Brass. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$11.25 EA