Part #
A-9575
|
Model Year
28-34
Goes in the bowl, in the float chamber of the Zenith carburetor from 1928-34.
Part #
A-9574
|
Model Year
28-31
Special tap for cleaning the jet threads in the Zenith carb. 5mm x .75 pitch. U.S.A.
Part #
A-9586-AR
|
Model Year
28-28
The double venturi was used on the early Zenith carburetors. U.S.A.
Part #
A-9570-C
Model Year
28-31
Part #
A-9570-CP
Model Year
28-31
The adjustment needle driver for the carb. Cad plated as original. The driver is what joins your choke rod to the A-9525 adjusting needle. U.S.A.
Part #
A-9558
|
Model Year
28-31
Pin that the float pivots on. Zenith carb, will need shortened for Tillotson carb. U.S.A.
Part #
A-9542
|
Model Year
28-31
For the Zenith carb. The long idle jet threads into the upper carb casting next to the threads for the bowl bolt to thread in. U.S.A.
Part #
A-9577-AMB
Model Year
28-29
Part #
A-9577-BMB
Model Year
30-31
We have the 1928-29 large headed brass and the cad for the 1930-31's. Comes with cap and spring. U.S.A.
Part #
A-9534
|
Model Year
28-34
For the Zenith carb. The main jet is the jet that threads into the carburetor bowl under the drain plug. Used in the 1928-31 model A Zenith carb as well as the 1932-34 Zenith carburetor used with 4-cylinder motors. U.S.A.