Part #
A-9600-F
|
Model Year
28-34
At last, an air filter for the air maze that requires no modifications. Just take the screen out of your old air maze, and this filter will fit right on. Give your Model A engine the clean air it deserves. 3-3/8" O.D., 3-1/2" Long. U.S.A.
Part #
A-9600
|
Model Year
28-31
It's a good idea to put an Air Maze on your car. First as an air cleaner and second, in case of a backfire, it's a flame arrester. Fits Zenith, but will work on Tillotson if throat is enlarged on the I.D.
Part #
A-9600-HB
Model Year
28-31
Part #
A-9600-HBX
Model Year
28-31
Filter assembly simply clamps to the OD of the carburetor throat with a rubber hose and hose clamp. Puts the filter above the carburetor so it is not affected by gas dripping into the element.
Element comes pre-oiled and can be cleaned and recharged when necessary. Filter cleaner and oil can be purchased at your local parts store when this is necessary. U.S.A.
Part #
A-9600-ADP
|
Model Year
28-31
What you will need to adapt your early style air maze to accept the larger high volume air filter (A-9600-HV).
Part #
A-9600-HV
|
Model Year
28-31
Larger size filter which is the same size we are now using on our A-9600-ACC air maze. Filter is 5-3/4" tall, 4-3/8" dia. End caps of air maze set in groove on the ends of the filter, not around the outside diameter. If you have an air maze with the smaller filter, you can order A-9600-ADP adapter kit so it will accept this larger filter.
Part #
A-9600-ACC
|
Model Year
28-31
Due to clearance issues with the exhaust, our new design swings the filter under the carburetor. Makes changing the filter a breeze and you can still run your engine pans! Gives the old carb nice clean air! New improved version has a larger filter that is 5-3/4" tall, 4-1/2" wide. Will not fit on a right hand drive car.
Part #
A-9510-WF
|
Model Year
28-31
Filter element for the Weber carburetors that we offer.
Part #
A-9600-X
|
Model Year
28-31
Wire screen type air filter for the A-9600 air maze. Can be cleaned and reused.