Part #
A-2711
|
Model Year
28-28
Used only on the 1928 emergency brake levers mounted to the left. Pulls the pawl to keep it secured. U.S.A.
Part #
A-3445
|
Model Year
28-31
On the early style emergency brake cross shaft, these springs pushed against the A-2839-R bushings to keep the cross shaft centered.
The springs were also used in the original style radius rod cap assembly. U.S.A.
Part #
A-2795-ARMB
|
Model Year
28-29
Flat head screw that holds the A-2795-AR ratchet to the transmission tower. U.S.A.
Part #
A-2637
|
Model Year
28-31
This is the shaft housing only. Often bushings are worn out allowing the A-2636-A toggle lever to wear into this housing. Once this happens, replacement bushings are no longer a good tight fit when installed. This housing does not include the bushings. Must be welded to your old carrier plate. U.S.A.