Part #
A-2793
|
Model Year
28-29
The spring inside the emergency brake lever that locks the pawl rod in place. U.S.A.
Part #
A-2781-MB
|
Model Year
28-31
This bolt is used on the handles that are mounted to the front of the gear shift to clamp the handle to its shaft. U.S.A.
Part #
A-2782-MB
|
Model Year
28-31
The bolt with the special thin head and castle nut for the handle that mounts on the side of the transmission. U.S.A.
Part #
A-2713-MB
|
Model Year
28-28
This pin is used to secure the A-2713-A lever latch to the emergency brake handle. U.S.A.
Part #
A-2780-A
Model Year
29-29
Part #
A-2780-B
Model Year
28-29
Part #
A-2780-C
Model Year
30-31
Very nice reproductions of the original emergency brake handles. There was a style made for the brake to front style that had a push button like the 1930-31, but it is not pictured.
The early one is for the style that is mouted to the front of the gear shift, and the later style is for the brake to right of gear shift mount.
Originally these had a butler nickel finish, these are chrome plated.
Part #
A-2713-A
|
Model Year
28-28
Used on the early 1928 emergency brake levers mounted to the left. Supplied in bare steel. U.S.A.
Part #
A-2644-S
|
Model Year
28-31
Just what you see in the photo. Everything you need to mount the emergency brake levers on the toggle levers. U.S.A.
Part #
A-2744-R
|
Model Year
27-29
This large spring was used on early cars and AA trucks that had the emergency brake lever to the left.
Part #
A-2646/47
|
Model Year
28-31
These install on the brake shaft outside the backing plate and return the levers to the home position. U.S.A.