Brakes

Brand New, Not Refurbished! New shoes are available with or without the lining installed. Shoes are available with our A-2021 woven lining or the A-2021-X molded lining.

Manufactured by Flat Head Ted. These special square headed pins replace your normal A-2045 roller pins on the rear braking plates. The head of these pins has 4 different thicknesses so you can rotate the heads to change the centering of your brake shoes. If you have worn brake tracks, simply file them flat and use these pins to get your shoes back to center. saves you the expense and labor of having to change out your rear brake track kit.

This handy tool can be used on the front or the rear brakes of the Model A. On the rear, the tool rotates on the end of the axle housing where the roller bearing rides. When used on the front, your inner and outer bearings center the tool on the spindle. The purpose of this tool is to make sure your brake shoes are centered on the backing plate. Worn, bent, or misaligned parts can cause this problem to exist. U.S.A.

It takes 2 of these per wheel. One end attaches to the brake shoe and the other to the roller track pin head. U.S.A.

This special headed clevis pin is used on the 1928-29 cars. The head is made so you can hook the stop light switch link to it. U.S.A.

The heads of the A-2013 rivet set in the center of this tool and serves as backing bar when peening the rivets. Keeps the heads from being damaged. U.S.A.

A pack of 80 brass tube style rivets that are used for putting on brake Linings. U.S.A.

Special bolt that holds the A-2050 in place at the bottom of the front backing plate. Includes A-2052 washer. U.S.A.

Two castle nuts and cotter pins for holding the wedge stud in place on the backing plate. 1 kit does both sides. U.S.A.