Part #
A-2240-B
|
Model Year
28-31
Used on the rear wheels of the Model A to keep grease off of the brake linings. Mounts under nuts that hold backing plate to axle housing. U.S.A.
Part #
A-2235-C
Model Year
28-31
Part #
A-2236-C
Model Year
28-31
Levers that get pinned to the rear brake camshaft A-2231-A and your brake rod hooks onto it. Very well made. Mounting pin is included. Left is drivers side in a left hand drive vehicle.
Part #
A-2011-BR
|
Model Year
28-31
Complete kit to replace rear track, bushings are installed and reamed. Does two wheels. U.S.A.
Part #
A-2485-D
|
Model Year
28-31
Levers are removed and our A-2477-RK repair kit is installed with the solid bronze bushings. If clevis pin holes are still good, we leave them as standard. Otherwise, we drill the clevis pin holes to accept the oversize A-2463 clevis pins and supply the pins. Levers are reinstalled with rivets as original. We MUST have your core on hand before we will ship out a rebuilt unit. Badly pitted shafts and/or levers will not be considered rebuildable. U.S.A.
Part #
A-2019
|
Model Year
28-31
Old shoe is blasted and primed, with new woven brake lining installed. These are sold on exchange only and we MUST have old shoes on hand before we can ship our relined shoes. U.S.A.
NOTE: When sending in yous old shoes, the linings MUST be removed.
Part #
A-2019-M
|
Model Year
28-31
Original brake shoes that have been relined with our A-2021-X soft molded brake lining. Sold on exchange only, we must have your old original shoes on hand before we can ship these out. When sending in your old shoes, the lining MUST be removed. Sold individually, you'll need 2 shoes per wheel. U.S.A.
Part #
A-2078-R
|
Model Year
28-31
Complete right front brake actuating assembly ready to install.
Uses A-2080 mounting kit sold separately to attach to the spring perch.
The outside diameter of the scoop on the end normally needs filed/ground in order to fit properly in the head of the king pin.
Part #
A-2045
Model Year
28-34
Part #
A-2045-Q8
Model Year
Uses one per brake shoe and holds A-2023 rollers to the brake shoe. Zinc plated and hardened for long life. 'Correct head' U.S.A.
Part #
A-2021
Model Year
28-31
Part #
A-2021-H
Model Year
28-31
This lining is the soft woven type with brass wire in the lining. One set will do all 4 wheels. Complete with rivets (non asbestos). U.S.A.