Brakes

|
Show 54 Of 87
Showing 54 Of 87 results
Part # A-2082-Q4 | Model Year 28-31
Graphite bushings for the front brake shafts. This is a pack of 4 which is the required amount for 1 car. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$4.75 SET
Part # A-2082-R | Model Year 28-31
Not a cheap import adjustable reamer, this reamer is made to ream the front brake shaft bushings in line with each other so the brake shaft will rotate smoothly. This long reamer reams both bushings at one time. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$155.00 EA
Part # A-2076-B Model Year 28-31
Part # A-2077-B Model Year 28-31
The shaft that sets horizonally and operates the A-2075 brake operating pins. Very good quality. U.S. made.
Part # A-2050 | Model Year 28-31
For the front brakes, this is the piece that the brake operating pin pushes on to actuate the front brakes. Import, but very good quality!
DISCONTINUED
Temporarily
OUT OF STOCK
$26.50 EA
Part # A-2060 | Model Year 28-32
Baffle goes inside the backing plate and is held in place by the bolts that hold the backing plate to the spindles. Catches any grease that spins out of the hub and keeps it of off of the brake shoes. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$27.95 EA
Part # A-2021-XH | Model Year 28-31
DISCONTINUED
Temporarily
OUT OF STOCK
$44.00 SET
Part # A-2001-K | Model Year 28-31

This kit will convert your Model A's mechanical brakes over to hydraulic. Includes backing plates, front and rear hubs with bearings and seals, hoses, and hardware. Cables are included for the emergency brakes. These are 12 inch brakes. PLEASE REVIEW THE MOUNTING INSTRUCTIONS BEFORE PURCHASING THIS KIT! There is some grinding and fitting that must be done to your king pin, spindle, and axle housing in order to install this kit. You will need to purchase brake fluid and purchase 5 brake lines from your local automotive parts store to complete the installation. Sizes for the brake lines are specified in the instructions. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$3650.00 KIT
Part # A-2078-L | Model Year 28-31

Complete left front brake actuating assembly ready to install.

Uses A-2080 mounting kit sold separately to attach to the spring perch.

DISCONTINUED
Temporarily
OUT OF STOCK
$129.95 EA
Part # A-2035 | Model Year 28-31
American made with all the right bends in all the right places. Long adjusting spring. You will need 1 per wheel. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.75 EA