Part #
A-2087-S
|
Model Year
28-31
These little dust rings slip over the shaft of the brake camshafts before the levers are slid on. Keeps dirt and grit out of the bushings. 1 set per car. U.S.A.
Part #
A-2504/2866
|
Model Year
28-31
The original type flat spring steel anti-rattlers. These bolt to the bracket on the car, and push on the nubs on the brake rods. Not a cheap import, these are top quality U.S. made! 6 per set.
Part #
A-2011-MB
Model Year
28-31
Part #
A-2011-HMB
Model Year
28-31
The correct old-style bolts with the shank drilled for cotter pins. The set will do two wheels. The half set is for 1 wheel. U.S.A.
Part #
A-2078-L
Model Year
28-31
Part #
A-2078-R
Model Year
28-31
Complete front brake actuating assembly ready to install.
Uses A-2080 mounting kit sold separately to attach to the spring perch.
Part #
A-2079
|
Model Year
28-29
Set of 2 castle nuts and cotter pins used to secure the front brake actuating assembly to the spring perch. Castle nuts were used from the beginning of production until mid 1929. U.S.A.
Part #
A-2080
|
Model Year
29-31
2 hex nuts and 2 lock washers for mounting the front brake actuating assembly to the spring perch. Used from mid 1929 until the end of production. U.S.A.
Part #
A-2084
|
Model Year
28-31
Fastens to the end of the front brake shaft and your front brake rod attaches to it. Investment cast steel. U.S.A.
Part #
A-2085
|
Model Year
28-31
The pins that hold the lever that your brake rods hook to on the front end to the shaft. U.S.A.
Part #
A-2011-A
|
Model Year
28-31
This kit has the track assembly with rivets and the rivet setting tool. 1 kit does both front wheels. U.S.A.