Brakes

|
Show 36 Of 87
Showing 36 Of 87 results
Part # A-2462 Model Year 09-34
Part # A-2462-Q14 Model Year
Part # A-2463 Model Year 09-34
Part # A-2463-Q14 Model Year

For all of the brake rods. Available in standard size which is .310 diameter, and if your pin holes are worn, you can drill them out and put in the oversize which are .340 diameter. U.S.A.

Part # A-2461 | Model Year 09-34
This 2-pronged clevis is used on the brake pedal to cross shaft rod. Forged. 5/16"-24 thread. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$4.95 EA
Part # A-2026 | Model Year 28-31
This handy tool holds the head of the cotter pin in place while you bend it. Use with A-2462, A-2463, A-2027 and A-2045 pins. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$9.95 EA
Part # A-2478/79-MB | Model Year 28-31
Drilled bolts with castle nuts and cotter pins for holding the cross shaft brackets to the frame. 1 set does both sides. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$8.50 SET
Part # A-2477 Model Year 29-31
Part # A-2477-B Model Year 28-31
Part # A-2477-BS Model Year 28-31

We have either the split style or the solid style. With the split style, you won't have to take your levers off of the cross shaft to put new bushings on. If the bushings do not fit properly on your shaft, it is best to take ends off and have the shaft built back up or install our A-2477-RK repair kit. Fits 1928-31. U.S.A.

Part # A-2477-RK | Model Year 28-31
Repairs the brake cross shaft if it is worn where the A-2477 style bushings ride. Kit includes sleeves that are slid over worn areas of cross shaft and liquid metal to hold them in place, special larger bore bronze bushings,lever pins and instructions. One kit does both sides of the cross shaft. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$29.95 SET
Part # A-2485-RI | Model Year 28-31
These rivets hold the arms onto the sevice brake cross shaft. 5/16" dia. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 PR
Part # A-2051-DLX | Model Year 28-31
Expanding on the huge success of the Brake Floater Kit, FlatheadTed is proud to bring you the Deluxe Brake Floater kit. This kit builds on the original by adding a set of 4 brake shoe centering pins, a set of special roller pins and a new thread cleaner in addition to the the original Brake Floater Kit. The brake shoe centering pins are used on the rear shoes to center the shoe in the brake drum which saves repair on the lower track. The special front rollers replace the stock items to give a smooth action and save from cotter pin interference while the thread cleaner is used to clean out rust and debris from the top adjuster hole to help simplify the fitting of the kit.
DISCONTINUED
Temporarily
OUT OF STOCK
$275.00 SET
Part # A-2041-C | Model Year 28-31
When replacing the brake adjust wedges, these are the caps that pop out of the backing plate. Made just like the originals. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.30 EA