Part #
A-2499-B
Model Year
28-31
Part #
A-2864
Model Year
28-31
Made in U.S.A. with forged ends. The best you can buy!
A-2499-B Service Rod is 50-1/2" from end to the center of the hole.
A-2864 Emergency Rod is 40-7/8" from the end to the center of the hole.
A-2499-B2864 is a complete set of both the emergency brake and the service brake rods. 6-rods.
Part #
A-2018
|
Model Year
09-31
This little anvil clamps in a vise and makes riveting or removing old linings a snap! Kit comes with a punch to knock out old rivets, a tool to swedge new tubular rivets, and a tool to drill and countersink linings.
Part #
A-2023
Model Year
28-34
Part #
A-2023-Q16
Model Year
A cad plated and heat treated roller. An exact repo. Available individually or in sets of 16. These attach to your brake shoes with the A-2045 pins and are what engage with the front brake wedges and the rear brake cams. U.S.A.
Part #
A-2035/36
|
Model Year
28-31
This is the best buy! Set includes all of the springs for service and emergency brakes inside the drum. U.S.A.
Part #
A-2013
|
Model Year
28-31
The special rivets that hold the brake tracks to the backing plates. Made long enough to use on front or rear. Install these before you paint, since they need to be heated red hot in order to swedge them in place. U.S.A.
Shank of rivet that gets peened is 1/4"
Part #
A-2455-B
|
Model Year
28-31
A forged steel pedal head to repair that old worn or bent head. Used for brake and clutch. Must be welded on. U.S.A.
Part #
A-2227-R
|
Model Year
28-31
This bushing is used to ream the A-2227 bushings after they have been installed, for a perfect fit. This is a quality American made spiral cut hand reamer. Not a cheap import! U.S.A.
Part #
A-2227
Model Year
28-34
Part #
A-2227-Q8
Model Year
Used on both the emergency brake and the service brake camshafts in the rear housings. A-2331-A and A-2636-A ride in these bushings. U.S.A.
Part #
A-2466
|
Model Year
28-34
The fisheye type as used on the service brake rods. Need 4. Forged for strength.