Part #
A-174-A
|
Model Year
28-29
About 3" tall, and goes just above the windshield on Coupes and Tudors. The wooden header for the top sits on top of this panel. U.S.A.
Part #
A-174-B
Model Year
30-31
Part #
A-174-C
Model Year
30-31
This panel slips up in the windshield opening and covers the front of the wood header and goes inside the car at the bottom and provides a trough for the interior panel inside the car to set into.
There are two different grades of this panel on the market, one that fits and one that doesn't. Ours is more expensive than the other, but ours is the one that fits! U.S.A.
Part #
A-817-A
|
Model Year
26-29
The visor for the 1926-27 Coupes and Tudors and 1928-29 Closed Cab Pickup. Cover kit not included. U.S.A.
Part #
A-817-BKT
|
Model Year
28-29
If you have an A-817-A Sun Visor or any other reproduction sun visor you will need these brackets. They are used to install the visor cover kit. Original visors will already have these brackets but all aftermarket sun visors are made without them. Also for use with KIT#5R and KIT#5RS visor covers. U.S.A.
Part #
A-317-A
|
Model Year
28-29
This metal sun visor is used on the 1928-29 Coupes and Tudor Sedans. These were covered originally. Cover kit must be ordered separately. U.S.A.
Part #
A-317-BS
|
Model Year
30-31
Not a 100% exact copy of the original, but will fit and do the job nicely. Fits Coupe, Tudor and Pickup Trucks. U.S.A.
Part #
A-317-AKS
Model Year
28-29
Believe it or not, the 1928-29 Coupe and Tudor Sedan sun visors were covered in top material. This is a kit with everything you will need to cover that visor.
Available in long or short grain cobra material. (black) U.S.A.
Part #
A-3406-VW
|
Model Year
30-31
A 4' long piece of fender welt that goes between the sun visor and the wooden header.