Show 9 Of 9
Showing 9 Of 9 results
Part # A-415 Model Year 28-29
Part # A-416 Model Year 30-31
For the 4-dr. Phaeton. This is the metal center section behind the front seat. If you were sitting in the back seat, you would be facing this panel.
Part # A-121-A Model Year 28-29
Part # A-121-B Model Year 30-31
Part # A-321-A Model Year 28-29
Part # A-321-B Model Year 30-31
Part # A-123-A Model Year 28-29
Part # A-123-B Model Year 30-31
Part # A-623-B Model Year 30-31
This is the rear part of the front seat riser. It is the part that the backrest spring sets on. U.S.A.
Part # A-457-A Model Year 28-29
Part # A-457-B Model Year 30-31
Part # A-757-A Model Year 28-29
Complete seat riser with the floor pan and the hump for the frame cross member. U.S.A.
Part # A-321-BA | Model Year 30-31
For the 1930-31 Coupes, we can offer the complete seat assembly. It has 2 metal ends, the 2 wood center pieces, the metal toe panel, and all of the nuts bolts. Seat track kit is not included.
Part # A-121-ASC | Model Year 28-29
This is a set of the special clips that attach to the seat back wood of the 1928-29 Roadster that hold the seat spring on. U.S.A.
Part # A-121-ABRACE | Model Year 28-29
For the 1928-29 Roadster, this brace runs at the rear of the front seat riser for support. U.S.A.
Part # A-321-T | Model Year 30-31
The track assembly for the seat carriage assy. on the 1930-31 Coupes. U.S.A.
Part # A-123-AP Model Year 28-29
Part # A-123-BP Model Year 30-31
Goes under the back of the front seat of 4-dr. Phaetons. If you are sitting in the back seat, your toes would bump against this panel. U.S.A.