Running Boards & Parts

|
Show 9 Of 15
Showing 9 Of 15 results
Part # A-16455-GPM Model Year 30-31
Part # A-16451-GPM Model Year 31-31

The pyramid design running board matting for the 1930-31 running boards. This has an adhesive backing so all you need to do is pull the backing off, and stick them on the running board.

The 1930 style is the pyramid design.  The 1931 style is pyramid design with the half round bead on the inner edge and fender edges. 

You can put the cheaper 1930 matting on a 1931 board but I would recommend you use the 30 style trim to finish off the board. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-185-CH | Model Year 31-31
Authentic style 1931 running boards with rubber molded directly to the metal board. These boards have the half round bead molded into the rubber with a slight flat area between the bead and the pyramid like original. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$725.00 PR
Part # A-185-H Model Year 28-29
Part # A-185-G Model Year 30-31
Part # A-185-J Model Year 30-31
Various odd length running boards that were used on the AA trucks. All are U.S. made except the A-185-J which are made in Denmark.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-16400 | Model Year 28-31
Polished aluminum step plates for the Model A with an oval Ford script design 6-1/4" x 8" footprint. These were an accessory item, not supplied by Ford originally.
DISCONTINUED
Temporarily
OUT OF STOCK
$44.95 PR
Part # A-5125-MB | Model Year 28-31
Set of round headed bolts with lock washers and nuts. Round heads to resemble rivets. One set does all 4 brackets. Mounts running board brackets to the frame.
DISCONTINUED
Temporarily
OUT OF STOCK
$4.50 SET
Part # A-185-D Model Year 28-29
Part # A-185-E Model Year 30-31

These are the all steel running boards for the pick-up trucks. We handle only ROOTLIEB brand pick-up running boards. While they may cost a little more, it's well worth the difference. As these are 100% authentic!

Made just like the original boards with the raised diamond pattern. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-16452 | Model Year 28-29
The special bolt with the high crown as original. 24 pieces per set. Bolts, nuts and lock washers. This kit is for Model A's that have the forged style running board brackets instead of the later stamped steel style. The forged style was used from the beginning of production through as late as March of 1929. The inner running board mounting bolts are slightly longer in this kit. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$6.75 SET
Part # A-16453 | Model Year 30-31
The special bolt with the high crown as original. 24 pieces per set. Bolts, nuts and lock washers. This set is for any Model A that has stamped steel running board braces. 1 set does both running boards. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$7.25 SET
Part # RA-1003 | Model Year 29-31

Ten 5/16" D. X 1" Lg. Round Head Rivets, Two 5/16" D. X 1-1/2" Lg Round Head rivets.

Complete set of rivets for attaching the running board brackets to the frame rails. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$5.50 SET