Rumble Panels

|
Show 9 Of 11
11 Results
Part # A-151-A | Model Year 28-31
Goes in the rumble area where your feet would be. Works on Cabriolets with stationary seat only. 1928-29 Coupe 1928-31 Roadster 1929-31 Cabriolet (stationary seat). U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$99.00 EA
Part # A-161-AB Model Year 28-31
Part # A-361-A Model Year 28-29
Part # WEB-KIT-1761 | Model Year 28-31

This is the panel just below the rumble lid on the inside. When converting the trunk to a rumble seat, this panel is needed so the rumble lid will have clearance when opening and closing. The top of this panel mounts to the panel below the deck lid, and the bottom sits on top of the rumble platform. U.S.A.

A-161-AB fits 1928-31 Roadster and 1930-31 Coupe.

A-361-A fits 1928-29 Coupe and 1928-31 Cabriolet.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-1059-A Model Year 28-29
Part # A-1059-B Model Year 30-31
Part # A-1059-AT Model Year 28-29
Part # A-1059-BT Model Year 30-31
Part # A-1059-ABS Model Year 28-31
Part # WEB-KIT-1100 | Model Year 28-31

Steel deck/rumble lids. These are the inner and outer structures. Rumble lids have the D-nuts installed to accept the A-41543-S reproduction rumble hinges as well as the D-nuts for the clips to hold the seat spring to the lid. The holes are already in place for the handle and latch.

Trunk lids have the D-nuts installed for the A-41530 deck lid support and holes in place for the latch and handle. If your inner structure is still in good shape, we have a steel skin only! U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-161-ABTR | Model Year 28-31
This panel is used on Coupes or Roadsters using the rumble area as a trunk. The top fastens to the panel below the deck lid and the bottom attaches to the rear-top edge of the seat riser. Trunk applications still used a seat riser regardless to allow clearance for the rear frame cross member. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$115.00 EA
Part # A-167-A Model Year 28-29
Part # A-167-B Model Year 30 31
Part # WEB-KIT-1760 | Model Year 28-31
This is the panel between the deck lid and the back of the top. For Roadsters only. Won't work on Coupes. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-351-B Model Year 30-31
Part # A-352-A Model Year 29-29
Part # A-352-AC Model Year 30-30
Part # A-352-BC Model Year 31-31
Part # WEB-KIT-1756 | Model Year 28-31
This panel is in the rumble area where your feet would be. Very good die stamped panels. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-162-A Model Year 28-29
Part # A-162-B Model Year 30-31
Part # WEB-KIT-1758 | Model Year 28-31
This is the part that the rumble hinge mounting bracket bolts to. Very nice die stamped repo. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-159-AB | Model Year 28-31
This panel is used in the deck area of Coupes and Roadsters. It was used regardless of whether you were using the back of your car as a trunk or a rumble seat. The reason it was used in trunk applications is that it provided clearance for the rear cross member of the frame. This is the panel that your cushion seat spring would set on. Very good die stamped panels. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$120.00 EA
Part # A-169-A Model Year 28-29
Part # A-169-B Model Year 30-31
Part # WEB-KIT-1757 | Model Year 28-31
This is the complete rain gutter for the rumble or deck lid. You will have to weld it together on the corners. We did it this way so it could be shipped by UPS or Federal Express.  U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK