Part #
A-16609-RI
|
Model Year
28-31
9/64 X 3/16 semi tubular rivets for holding the A-16609 hood handles to the hood. Zinc plated steel. U.S.A.
Part #
A-16735-C
|
Model Year
30-31
A Chrome finished retainer that holds the hood in place and has a finger incorporated into it that rolls over the top of the cowl band to help hold it in position.
Part #
A-16750-BU
|
Model Year
28-31
Fits over the stem of the hood latch. Rubber jams against the hood for a rattle free clamp. These are an accessory, you can't use these if you already have A-16761 or A-16761-B on your hood. U.S.A.
Part #
A-16750-C
|
Model Year
28-31
Rubber caps that protect the paint from getting scratched. 4 round caps for end of hood handle that latches on hood and 4 rectangle tips that mount on the outer edge of the hood handle where you pull up with your fingers. Note: 1 set does all 4 hood handles. U.S.A.
Part #
A-16750-P
|
Model Year
28-31
A set of 4 rubber pads that fit under the hood latches. Use as is on the1928-29's, and trim off the lip for 1930-31. U.S.A.
Part #
A-16750-RK
|
Model Year
Kit gives you four stainless springs, four stainless 1/8" x 7/16" roll pins, and four zinc plated steel 1/8" x 1" semi tubular rivets for rebuilding the original hood latches. U.S.A.
Part #
A-16751
|
Model Year
28-31
These are the tiny rivets that hold the body of the hood latch to its mounting bracket. 4 per set. U.S.A.
Part #
#30
Model Year
28-29
Part #
#32
Model Year
30-31
Round head screws,nuts, and lock washers needed for attaching the hood latches. One set does all 4 handles. U.S.A.
Part #
A-16750-A
Model Year
28-29
Part #
A-16750-ASS
Model Year
28-29
Part #
A-16750-B
Model Year
30-31
Part #
A-16750-BSS
Model Year
30-31
3 hole mounting style was used originally in 1928-29.
2 hole mounting style was used in 1930-31.
4 required. Painted black