Floor Pans

|
Show 9 Of 9
Showing 9 Of 9 results
Part # A-458-ABF | Model Year 31-31
1931 Slant Windshield 4-door, '30-31 Vicky, and A400 used a piece of canvas under the rear seat to cover where the rear cross member stuck through the floor of the body. This is a set of the metal retaining strips that held the canvas to the floor pan. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$27.95 SET
Part # A-127-A Model Year 28-31
Part # A-727-AR Model Year 28-28
Part # WEB-KIT-1248 | Model Year 28-31

One style of these curtain pans fits under the front seat, the other early style fits under the rear floorboards. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-335-B Model Year 30-31
Part # A-338 Model Year 28-29
Part # WEB-KIT-1247 | Model Year 28-31

Pan fits under the front seat and drops down between the sub rails and cross channels. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-455-C Model Year 30-31
Part # A-455-H Model Year 28-31
Part # A-455-J Model Year 28-31
Part # A-755-A Model Year 28-29
Part # WEB-KIT-1251 | Model Year 28-31
For A-400, Vicky, Murray and Briggs and Phaeton. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-635-B | Model Year 30-31
This pan is for the 68-C Cabriolet, Slant Windshield 4-dr, and the late 31 Coupe. It is 2-1/2" deep, and measures 11-1/2" x 27-1/2". Under front seat. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$92.00 EA
Part # A-337-A Model Year 28-29
Part # A-337-B Model Year 28-29
Part # WEB-KIT-1249 | Model Year 28-31
Used in the back seat area of the Fordors. This pan goes where your feet would be if you were sitting in the back seat. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-455-A Model Year 28-29
Part # A-455-B Model Year 30-31
Part # WEB-KIT-1250 | Model Year 28-31
These are the pans only for under the rear seat of the Tudor Sedan. They come with the supports, but do not come with the hump in them. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-458-AB | Model Year 28-31

This hump was spot welded in the rear seat riser of Tudor Sedans, and 4-Door Sedans. Pan is not die stamped like the originals, they are formed out of 3 pieces of metal spot welded together. DIMENSIONS - 22 1/8" X 9 1/8" X 3 1/8" U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$105.00 EA
Part # A-835-A | Model Year 28-29
Installs under the front seat and fits the 1928-29 Closed Cab Truck. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$76.00 EA