Part #
A-4655
|
Model Year
28-48
The sleeve for the drive shaft bearing in the front of the torque tube. U.S.A.
Part #
T-2598
|
Model Year
09-31
The special thin castellated nut that holds the pinion gear onto the drive shaft. Original Ford. U.S.A.
Part #
A-4246
|
Model Year
28-31
This is a low-buck tool for installing the A-4245 seals. The inside of the tool has pipe threads. Just screw in a piece of your own pipe. U.S.A.
Part #
A-4209-HS
|
Model Year
28-31
These gears will increase your speed slightly. Fits all Model A cars and small trucks!
Part #
A-4245
|
Model Year
28-48
You will need two for the rear axles and one for the drive shaft.
Part #
A-4235-WP
|
Model Year
09-48
With the wheel still bolted onto the hub, take the axle nut off and screw this on. Then you hit this to break the hub free from the axle. U.S.A.
Part #
A-4605-B
|
Model Year
28-31
A very well made drive shaft for the Model A. Exact in every detail! U.S.A.
Part #
A-4616
|
Model Year
28-32
This is a double sided cup for the pinion bearings. U.S.A.
Part #
A-4634
|
Model Year
28-47
The large nut that secures the pinion gear into the pinion bearing assembly. 2 required. U.S.A.